EasyManuals Logo

Yealink SIP-T46S Administrator's Guide

Yealink SIP-T46S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
Using Handsets with T57W/T54W/T53W/T53 Phones
139
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Handset Settings Parameters
Parameter
custom.handset.eco_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the eco mode to greatly reduce the transmission power and signal output when
the phone is in the talk mode.
Permitted
Values
-1-Do not modify the configuration.
0-Disabled
1-Enabled
Default
-1
Supported
Devices
All handsets except DD phones
Handset UI
OK > Settings > System Settings (Basic Settings) > Eco Mode
Parameter
custom.handset.color_scheme <y0000000000xx>.cfg
Description
It configures the color scheme of the handset.
Note: It will take effect on all handsets that are registered on the same phone. It works only if the value
of the parameter “static.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
-1-Do not modify the configuration.
0-Color scheme 1
1-Color scheme 2
Default
-1
Supported
Devices
W52H
Handset UI
OK > Settings > Display > Color Schemes
Parameter
custom.handset.missed_call_notify_light.enable <y0000000000xx>.cfg
Description
It enables or disables the message key LED to flash red when the handset misses a call.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
-1-Do not modify the configuration.
0-Disabled
1-Enabled
Default
-1
Supported
Devices
W52H
Handset UI
OK > Settings > Display > Notification Light > Missed Call
Parameter
custom.handset.voice_mail_notify_light.enable <y0000000000xx>.cfg
Description
It enables or disables the message key LED to flash when the handset receives a voice mail.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
-1-Do not modify the configuration.

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals