EasyManuals Logo

Yealink SIP-T46S Administrator's Guide

Yealink SIP-T46S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Phone Provisioning
88
Note: If the phone performs auto provisioning when receiving a SIP NOTIFY message which contains
the header “Event: check-sync”, the phone will display the prompt message no matter whether the con-
figuration is updated.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
static.auto_provision.connect.keep_alive <y0000000000xx>.cfg
Description
It enables or disables the long connection for downloading files via auto provisioning.
Permitted
Values
0-Disabled, the phone uses the short connection for downloading files via auto provisioning
1-Enabled
Default
0
Parameter
static.auto_provision.authentication.expired_time <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) after which the authentication pop-up box for auto provisioning
disappears.
Permitted
Values
0-The authentication pop-up box does not disappear from the phone screen automatically.
Integer from 10 to 86400 -The authentication pop-up box automatically disappears from the phone
screen after the designated time.
Default
7200
Parameter
static.auto_provision.dns_resolv_nosys <y0000000000xx>.cfg
Description
It enables or disables the phone to resolve the access URL of the provisioning server using download
libraries mechanism.
Permitted
Values
0-Disabled, the phone resolves the access URL of the provisioning server using the system mech-
anism.
1-Enabled
Default
1
Supported
Devices
T42G, T41P, CP920
Parameter
static.auto_provision.dns_resolv_nretry <y0000000000xx>.cfg
Description
It configures the retry times when the phone fails to resolve the access URL of the provisioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to
1 (Enabled).
Permitted
Values
Integer from 1 to 10
Default
2
Parameter
static.auto_provision.dns_resolv_timeout <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) for the phone to retry to resolve the access URL of the pro-
visioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to
1 (Enabled).
Permitted
Values
Integer from 1 to 60
Default
5

Table of Contents

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals