Customizing Your Phone
97
The IP phone will prompt the connect passkey on the LCD screen, as shown below:
5. Make sure your mobile phone is showing the same passkey, and then press the OK on
both mobile phone and IP phone.
A message is displayed on the LCD screen:
6. (Optional.) Press OK to enable the mobile contacts sync feature and the IP phone will sync
the mobile contacts temporarily, or press Cancel to disable mobile contacts sync feature
and the IP phone will not sync the mobile contacts. If you press Cancel, you can also
manually enable the mobile contacts sync feature on the IP phone. For more information,
refer to Syncing the Mobile Contacts to the IP Phone.
If you enable mobile contacts sync feature, you also need to authorize the IP phone to sync
the contacts temporarily on the mobile phone.
To Next Page
Loading...
