User Guide for T5 Series IP Phones
32
Password and SIP Server1/2 field respectively.
5. If you use the outbound proxy servers, do the following:
1) Select Enabled from the Outbound Status field.
2) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval field
respectively.
6. Press Save.
You can repeat steps 2 to 6 to register more accounts.
Account registration is configurable via web user interface at the path Account->Register.
The following figures demonstrate single or multiple accounts registered on the phone:
Single account:
Multiple accounts:
Disabling an Account
You can disable an account after registering.
Procedure:
1. Navigate to Menu->Advanced (default password: admin) ->Accounts.
2. Select a desired account.
3. Select Disabled from the Activation field.
4. Press Save.
To Next Page
Loading...
