User Guide for T5 Series IP Phones
144
code to the server to activate/deactivate anonymous call rejection on the server side.
Configuring the Anonymous Call Rejection
Procedure:
1. Navigate to Menu->Features->Anonymous.
2. Select a desired line.
3. Select Enabled from the Local Anonymous Rejection (Local Anony Reject) field.
4. (Optional.) Select the desired value from the Send Rejection Code field.
5. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On
Code and Off Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call rejection feature on the phone.
6. Press Save.
Anonymous call rejection is configurable via web user interface at the path Account->Basic.
Placing a Call to Anonymous Rejected User
If phone B has anonymous call feature enabled and places a call to your IP phone, the call
cannot be dialed out on phone B, and the LCD screen of the phone B will display the following:
To Next Page
Loading...
