User Guide for T5 Series IP Phones
130
Setting Up a Local Conference Call
Procedure:
1. Place a call to the first party.
2. When the first party answers the call, press Conference (Conf) to place a new call.
3. Enter the number of the second party to dial out.
You can also select a desired contact from the search list, or select a contact from the
placed call list or Directory before you enter the number.
The active call is placed on hold.
4. When the second party answers the call, press Conference (Conf) again to join all parties in
the conference.
Joining Two Calls in a Conference
You can select a hold call to join into a conference call with the active call.
Procedure:
1. Place two or more calls using the same or different accounts on the phone.
2. Select the desired call for conference and ensure that the call is active.
3. Press Conference (Conf).
4. Select a desired hold call, and then press Send.
The active call and the selected hold call are joined into a conference. If there are multiple
hold calls, the other hold calls on the same or different accounts remain hold.
To Next Page
Need help?
General
Weight and Dimensions
