User Guide for T5 Series IP Phones
198
Connecting a YHS32/YHS33 Headset
Procedure:
1. Simply insert the modular connector into the headset port on the back of your IP phone.
For the information on how to connect headset YHS32/YHS33, see the YHS32/YHS33 user guide
on Yealink Technical Support page.
Note
Activating the Headset Mode
After connecting a headset to your phone, you can activate the headset mode and use headset
when answering and placing calls.
Procedure:
1. Press the HEADSET key on the phone.
The HEADSET key LED glows green, and the headset icon appears on the LCD screen.
When you press the line key or Answer to answer an incoming call, the call is answered in
Headset mode automatically. For more information on using the headset to answer a call,
refer to Answering Calls.
With the handset on-hook, enter the desired number and press Send, the phone will then
place a call using the headset automatically. For more information on using the headset to
place a call, refer to Placing Calls.
Deactivating the Headset Mode
If you don’t want to use a headset to handle calls, you can deactivate the headset mode.
Procedure:
1. Press the HEADSET key again on the phone.
The HEADSET key LED goes out, and the headset icon disappears from the LCD screen.
Enabling the Headset Prior
You can use headset in priority when receiving or placing calls. This feature is especially useful
for permanent or full-time headset users. To use this feature, you need to enable headset prior
feature in advance.
If both a Bluetooth headset and an analog headset are connected, only the Bluetooth headset
can be used.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
