Yealink SIP-T52S - Page 91

Customizing Your Phone
79
Destination number is blank:
Press the Forward key to enter the forward setting screen or
activate/deactivate the forward feature (if forward has been
configured from the Call Forward menu).
Custom Mode
(refer to Custom Mode)
Press the Forward key to enter the forward setting screen.
Procedure:
1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.
2. Select Key Event from the Type field.
3. Select Forward (FWD) from the Key Type field.
4. (Optional.) Enter the string that will display on the LCD screen in the Label field.
5. (Optional.) Enter the destination number you want to forward the incoming calls to in the
Value field.
6. (Optional.) For the SIP-T52S IP phone, enter the string that will appear on the LCD screen in
the Short Label field.
7. Press Save.
Note
Configuring a Transfer Key
You can perform a Blind, Semi-Attended or Attended Transfer by pressing the transfer key
during a call.
Procedure:
1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.
2. Select Key Event from the Type field.
3. Select Transfer from the Key Type field.
4. (Optional.) Enter the string that will display on the LCD screen in the Label field.
5. (Optional.) Enter the destination number you want to transfer the call to in the Value field.
6. (Optional.) For the SIP-T52S IP phone, enter the string that will appear on the LCD screen in
the Short Label field.
7. Press Save.
Note
If the Value field is left blank, the Forward key performs the same as the Forward (FWD) soft key
when receiving an incoming call.
If the Value field is left blank, the Transfer key performs the same as Transfer soft key during a
call.