Yealink VC400 - Page 109

Configuring Network
93
Parameter
Description
Configuration Method
packets.
Valid Values: 0-63
Default: 63
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Web User Interface
Video Priority
Specifies the DSCP value for video
packets.
Valid Values: 0-63
Default: 34
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Data Priority
Specifies the DSCP value for data
packets.
Valid Values: 0-63
Default: 63
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure QoS via web user interface:
1. Click on Network->Advanced.