Yealink VC400 - Hiding Menu Logo

Administrator’s Guide for Yealink Video Conferencing Systems
178
2. Select Enabled from the pull-down list of Hide IP Address.
3. Click Confirm to accept the change.
Hiding Menu Logo
When the system is idle, a Yealink logo is shown on the display device. You can hide the Yealink
logo as needed to achieve the best video effects.
Parameter of hiding menu logo on the system is described below:
Parameter
Description
Configuration Method
Hide Menu Logo
Enables or disables the system to
hide Yealink logo on the idle screen.
Default: Disabled
Web User Interface
To enable the hiding menu logo feature via web user interface:
1. Click on Setting->General.
2. Select the Enabled from the pull-down lists of Hide Menu Logo.