Administrator’s Guide for Yealink Video Conferencing Systems
150
Do Not Disturb
Do not Disturb allows the system to reject all incoming calls automatically. You can activate the
DND mode for the system when it is idle, and the DND mode will be deactivated after the
system places a call. You can also activate the DND mode for the system during a call, and the
DND mode will be deactivated after the system ends the call.
The DND parameter on the system is described below:
Enables or disables DND mode on
the system.
Default: Disabled
Remote Control
Web User Interface
To configure DND via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of DND.
3. Click Confirm to accept the change.
If Enabled is selected, the display device will display , and the LCD screen of the
video conferencing phone will display .
To configure DND via the remote control:
1. Select Menu->Call Features.
2. Check the DND checkbox.
3. Press the Save soft key to accept the change.
The display device will display , and the LCD screen of the video conferencing phone
will display .
To configure DND during a call via web user interface:
1. Click Home.
To Next Page
Loading...
