Yealink VC400 - Ringback Timeout

Administrator’s Guide for Yealink Video Conferencing Systems
158
Ringback Timeout
Ringback timeout defines a specific period of time within which the video conferencing system
will cancel the dialing if the call is not answered.
The ringback timeout parameter on the system is described below:
Parameter
Description
Configuration Method
Ringback Timeout
(30-240)
Configures the duration time (in
seconds) in the ringback state.
Default: 200
If it is set to 200, the system will
cancel the dialing if the call is not
answered within 200s.
Web User Interface
To configure ringback timeout via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Ringback Timeout(30-240).
3. Click Confirm to accept the change.