Yealink VC400 - H.323 Tunneling on

Configuring Network
75
If H.323 tunneling feature is enabled on both sites, the setup processes of an H.323 call are
shown below:
The parameter of the H.323 tunneling feature on the system is described below:
Parameter
Description
Configuration Method
H.323
Tunneling
Enables or disables the H.323 tunneling
on the system. You can configure it for
the StarLeaf Cloud platform or H.323
call separately.
Default: Disabled
Remote Control
Web User Interface
To configure the H.323 tunneling for StarLeaf Cloud platform via web user interface:
1. Click on Account->VC Platform.
2. Select StarLeaf from the pull-down list of Platform Type.