Yealink VC400 - Initial Configuration Wizard

System Overview
25
Item
Description
⑰
Keypad
 Enters digits.
 Long press to generate a special character “@” in
the input field.
 Enters the pre-dialing screen.
 Stores the preset position of the camera.
⑱
Video Recording Key
 Generates a special characters “.”.
 On the idle screen, press to start/stop recording
video.
 During a call, long press to start/stop recording
video.
⑲
Snapshot Key
 Generates a pound key (#).
 Captures the image from the camera.
 On the idle screen, press to capture the image
from the camera.
 During a call, long press to capture the image
from the camera.
Icon Instructions
Icons on Display Device
Icons appearing on the display device are described in the following table:
Icon
Description
(flashing)
Network is disconnected
Network is available
Packet loss
(flashing)
VCP40 video conferencing phone is not connected
(flashing)
Camera is not connected
SIP account is registered