Yealink VC400 - Sharing Content

Configuring Call Preferences
157
Sharing Content
If a PC is connected to the VC400/VC120 Codec, the system will start a presentation
automatically. During a call, both local and remote display devices will display the contents. You
can also start/stop a presentation manually during a call. If you disconnect the PC, the
presentation will stop automatically.
You can configure the resolution and frame rate of the presentation you are sending.
Presentation parameters on the system are described below:
Parameter
Description
Configuration Method
Share Resolution
Specifies the resolution of the
presentation.
 1080P
 720P
Default: 1080P
Web User Interface
Share Frame Rate
Specifies the frame rate of the
presentation.
 30fps
 15fps
 5fps
Default: 15fps
Web User Interface
To configure the presentation via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Share Resolution.
3. Select the desired value from the pull-down list of Share Frame Rate.
4. Click Confirm to accept the change.