Yealink VC400 - Meeting Blacklist

Configuring System Settings
187
2. Click Delete beside the numbers that you want to delete.
The web user interface prompts the message “Warning: Are you sure delete the white
number?”.
3. Click Confirm.
Meeting Blacklist
You can add the IP address, account or domain name of the remote system to the meeting
blacklist. VC400 /VC120 will refuse incoming calls from the blacklist automatically. If the user is
in both meeting whitelist and meeting blacklist, the blacklist has higher priority. VC400 /VC120
will still refuse incoming calls from this user. VC400 /VC120 will not remind incoming calls and
save call history from blacklist.
VC400 /VC120 supports up to 100 blacklist records. Blacklist is configurable via web user
interface only.
The blacklist parameter is described below:
Parameter
Description
Configuration Method
Meeting Blacklist
Number
Add the IP address, account or
domain name of the remote system
to the meeting blacklist.
Default: blank
Web User Interface
To add the blacklist numbers via web user interface:
1. Click on Directory->Meeting Blacklist.
2. Enter the user’s IP address, account or domain name in the Meeting Blacklist Number
field.