Yealink VC400 - Hiding IP Address

Configuring System Settings
177
2. Select desired value from the pull-down list of Automatic Sleep Time.
3. Click Confirm to accept the change.
To configure the automatic sleep time via the remote control:
1. Select Menu->Basic.
2. Select desired value from the pull-down list of Automatic Sleep Time.
3. Press the Save soft key to accept the change.
Hiding IP Address
The status bar of the display device displays IP address. You can choose to hide IP address on
the status bar.
Parameter of hiding IP address on the system is described below:
Parameter
Description
Configuration Method
Hide IP address
Enables or disables the system to
hide IP address on the status bar.
Default: Disabled
Web User Interface
To hide IP address via web user interface:
1. Click on Setting->General.