Administrator’s Guide for Yealink Video Conferencing Systems
96
files to the system first before
enabling the VPN feature. If you
change this parameter, the system
will reboot to make the change take
effect.
Uploads the compressed package of
VPN-related files (*.tar) to the
system.
To configure VPN via web user interface:
1. Click on Network->Advanced.
2. In the VPN block, click Browse to locate the VPN file (*.tar) from your local system.
3. Click Upload to upload the file to the system.
4. Select the desired value from the pull-down list of Active.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6. Click Confirm to reboot the system immediately.
To Next Page
Loading...
