Yealink VC400 - Page 231

Configuring System Settings
215
3. Click Confirm to accept the change.
To configure FECC(SIP) camera control protocol for Zoom/Pexip/BlueJeans/Mind/Custom
platform via web user interface:
1. Click on Account->VC Platform.
2. Select Zoom/Pexip/BlueJeans/Mind/Custom from the pull-down list of Platform Type.
3. Select the desired value from the pull-down list of FECC(SIP).
4. Click Confirm to accept the change.
To configure FECC(SIP) camera control protocol for SIP calls via web user interface:
1. Click on Account->SIP Account.