System Overview
11
VC400/VC120 Codec front panel
VC400/VC120 Codec back panel
Powers the system on or off.
Indicates the system statuses. For more information, refer
to LED Instructions on page 28.
Inserts a USB flash drive to one of the two USB ports for
storing screenshots, recording videos or capturing packets.
Note: If two USB flash drives are connected, only the latter
one can be identified.
Connects to a PC for sharing documents or videos during a
call.
Connects to a camera.
You can also connect two VCC20 cameras to the VC120
Codec using the VC Dual-camera Box VCB20.
To Next Page
Loading...
