Administrator’s Guide for Yealink Video Conferencing Systems
254
generic certificate for authentication.
The system can authenticate the server certificate based on the trusted certificates list. The
trusted certificates list and the server certificates list contain the default and custom certificates.
You can specify the type of certificates the system accepts: default certificates, custom
certificates, or all certificates.
Common Name Validation feature enables the system to mandatorily validate the common
name of the certificate sent by the connecting server. And Security verification rules are
compliant with RFC 2818.
TLS parameters on the system are described below:
Configures the type of transport protocol.
You can configure it for the
Zoom/Pexip/BlueJeans/Mind/Custom
platform, or SIP account separately.
UDP—provides best-effort transport
via UDP for the SIP signaling.
TCP—provides reliable transport via
TCP for SIP signaling.
TLS—provides secure communication
for SIP signaling.
DNS-NAPTR—performs the DNS
NAPTR and SRV queries for the service
type and port if no server port is
given.
Default:
For Zoom/Pexip/BlueJeans/Mind/Custom
platform, the default value is TCP.
For SIP account, the default value is UDP.
Note: You cannot configure it for the
Yealink/StarLeaf Cloud platform.
Remote Control
Web User Interface
Only Accept
Trusted
Certificates
Enables or disables the system to only trust
the server certificates in the Trusted
Certificates list.
Default: Enabled
Note: If it is enabled, the system will
authenticate the server certificate based on
the trusted certificates list. Only when the
authentication succeeds, will the system
trust the server.
To Next Page
Loading...
