Yealink VC400 - Page 290

Administrator’s Guide for Yealink Video Conferencing Systems
274
MIB
OID
Description
0
YEALINK-MIB
1.3.6.1.2.1.37459.2.1.1
0.0
The target version to which the current
version is updated automatically.
Format:
MacVersion[*]ComVersion[*]
For example,
MacVersion[0.0.0.1]ComVersion[0.0.0.1]
YEALINK-MIB
1.3.6.1.2.1.37459.2.1.1
1.0
The command of the system reboot.
Format:
snmpset -v 2c XXXX public 37459.2.1.11.0 s
reboot
XXXX refers to the IP address of the system.
SNMP parameters on the system are described below:
Parameter
Description
Configuration Method
SNMP->Active
Enables or disables SNMP feature on
the system.
Default: Disabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Web User Interface
Port
Specifies the SNMP port.
Valid Values: 1-65535
Default: 161
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Web User Interface
Trusted Address
Configures IP address(es) or domain
name of the trusted SNMP server.
Multiple IP addresses or domain
names should be separated by
spaces.
Note: If it is left blank, the system
accepts and handles GET requests
from any SNMP server.
If you change this parameter, the
system will reboot to make the
Web User Interface