Getting Started
37
a) Mounting the camera on a TV
When the thickness of your TV is between 35-120 mm, you can mount the camera on your TV.
Do the following:
1. Lock the camera to the L-bracket.
2. Remove the protection of the Velcro.
3. Put the L-bracket on the top of the TV.
4. Make sure the back of the TV is clean, and then adjust the bracket to ensure close
adhesion to the back of the TV with Velcro.
b) Mounting the camera on a wall
You can also decide to mount the camera on a wall. The recommended height for camera
positioning is 1.5m-1.8m above the ground.
Do the following:
1. Punch holes into the wall and then insert the expansion bolts.
Installation location for the expansion bolts and punching requirement are shown above.
2. Lock the L-bracket with the M3×8 screws.
3. Move the setscrews on the L-bracket to the left holes.
4. Lock the L-bracket to the wall with T4×30 screws.
5. Connect one end of the DVI cable to the camera and put the other end of the cable
To Next Page
Loading...
