Yealink VC400 - Page 70

Administrator’s Guide for Yealink Video Conferencing Systems
54
Parameter
Description
Configuration Method
or off.
Default: Off
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Web User Interface
Primary DNS
Configures the primary DNS server
assigned to the system.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Secondary DNS
Configures the secondary DNS
server assigned to the system.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure the IP address mode via web user interface:
1. Click on Network->LAN Configuration.
2. Select desired value from the pull-down list of IPv4/IPv6.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.