Yealink VC400 - Page 74

Administrator’s Guide for Yealink Video Conferencing Systems
58
Parameter
Description
Configuration Method
DNS
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
DNS Secondary
Server/Secondary
DNS
Configures the secondary IPv6 DNS
server.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure IPv6 address assignment method via web user interface:
1. Click on Network->LAN Configuration.
2. Select the desired IP mode (IPv6 or IPv4 & IPv6) from the pull-down list of IPv4/IPv6.
3. In the IPv6 Config block, mark the DHCP or the Static IP radio box.
- If you mark the Static IP radio box, configure the IPv6 address and other
configuration parameters in the corresponding fields.