Yealink VC400 - Page 82

Administrator’s Guide for Yealink Video Conferencing Systems
66
Parameter
Description
Configuration Method
change take effect.
VID(1-4094)
Configures VLAN ID for the Internet
(WAN) port.
Default: 1
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Priority
Configures VLAN priority for the
Internet (WAN) port.
Valid values: 0-7
7 is the highest priority, 0 is the
lowest priority.
Default: 0
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure VLAN for Internet port via web user interface:
1. Click on Network->Advanced.
2. In the VLAN block, select the desired value from the pull-down list of Internet Port
Active.
3. Enter the VLAN ID in the VID (1-4094) field.
4. Select the desired value (0-7) from the pull-down list of Priority.
5. Click Confirm to accept the change.