Yealink VC400 - Page 85

Configuring Network
69
For more information on 802.1X authentication, refer to Yealink 802.1X Authentication .
802.1X feature parameters on the system are described below:
Parameter
Description
Configuration Method
802.1x Mode
Specifies the 802.1x authentication
mode.
 Disabled
 EAP-MD5
 EAP-TLS
 PEAP-MSCHAPv2
 EAP-TTLS/EAP-MSCHAPv2
Default: Disabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Identity
Configures the user name for 802.1x
authentication.
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Web User Interface
MD5 Password
Configures the password for 802.1x
authentication.
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Web User Interface
CA Certificates
Configures the access URL of the CA
certificate when the 802.1x
authentication mode is configured
as EAP-TLS, PEAP-MSCHAPV2 or
EAP-TTLS/EAP-MSCHAPV2.
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Web User Interface
Device Certificates
Configures the access URL of the
device certificate when the 802.1x
authentication mode is configured
as EAP-TLS.
Note: If you change this parameter,
the system will reboot to make the
Web User Interface