EasyManuals Logo

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
| Basic Settings | 138
Parameter Description Configuration Method
Auto Recording
Enable or disable the system to start
recording automatically once a call is
established.
On- the system starts recording
automatically once a call is established.
Off- the system does not start recording
automatically once a call is established.
Note: the default value is Off. Only the
Recording feature is enabled can this feature
be available.
Web user interface
Stop Recording
When Call
Established
Enable or disable the system to stop
recording automatically once a call is
established.
On- the system stops recording
automatically once a call is established.
Off- the system does not stop recording
automatically once a call is established.
Default: Disabled.
Web user interface
Stop Recording
When Call Ended
Enable or disable the system to stop
recording automatically once a call is ended.
On- the system stops recording
automatically once a call is ended.
Off- the system does not stop recording
automatically once a call is ended.
Default: On. It is not applicable to VP59.
Web user interface
Recording
Notification
Enable or disable the system to show
recording icon and recording prompt.
On- the recording icon and the duration
are displayed on the system screen.
Off- the recording icon and the duration
are not displayed on the system screen.
Default: On.
Web user interface
WPP20 Recording
Confirm
Enable or disable the system to allow the
action that you use WPP20 to record.
Default: On.
Web user interface

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals