Yealink VCM38 Administrator's Guide

| Getting Started | 31
Rear Panel of VCC22 Video Conferencing Camera
Port Name Description
1 HDMI Out Connect to a monitor for displaying shared content.
2 Camera Port Connect to a PoE switch.
3 Reset Key Reset the camera to factory defaults.
4 Security Slot Allow you to connect a universal security cable to VCC22, so you can lock it
down. The camera cannot be removed when locked.
Hardware of VCH50 Video Conferencing Hub
You can connect VCH50 to the computer for presenting. If you want to connect a PC to your system using
Ethernet cable, you need to connect the VCH50 video conferencing hub to your system. Connecting
VCH50 to the computer for presenting is not applicable to VP59.
• Left Side of VCH50 Cable Hub
• Right Side of VCH50 Cable Hub
• Rear Panel of VCH50 Cable Hub
Left Side of VCH50 Cable Hub
Port Name Description
1 Codec Connect to the video conferencing
system via the provided 7.5m network
cable.

Yealink VCM38 Specifications

General

Type	Conference microphone
Noise reduction	Yes
Microphone frequency	100 - 16000 Hz
Microphone sensitivity	-45 dB
Microphone pick-up range	6 m
Number of microphone arrays	8
Maximum sound pressure level (1kHz)	100 dB
Device interface	RJ-45
Connectivity technology	Wired
Maximum operating distance	40 m
Mounting type	Ceiling
Product color	Silver
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Number of products included	1 pc(s)
Harmonized System (HS) code	85181000
Power source	DC/PoE
Sustainability certificates	CE, Federal Communications Commission (FCC), REACH, RoHS

Weight and Dimensions

Width	127.3 mm
Height	66.3 mm