EasyManuals Logo

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #146 background imageLoading...
Page #146 background image
| Configuring the Audio Settings | 146
Specifying an Available Audio Output
You can specify an available audio output if you do not want to use the default audio output device.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Audio > Audio Settings.
On your VCS: go to More > Settings > Basic > Audio.
For VP59, tap > Settings > Basic > Audio.
On your CTP20/CTP18, tap > Settings > Basic > Audio.
2. Configure and save the following settings:
Parameter Description Configuration Method
Audio Output/Extended Audio
Output
Specify the audio output for the
system.
The supported types are as
follows:
Auto- the device will
automatically select the
connected audio output
device with the highest
priority.
VCS Phone - select the
CP960 conference phone. (it
is not applicable to VP59)
HDMI - select the built-in
speaker of the display. If you
connect two monitors to your
system, only the HDMI 1 port
is available for audio output.
Line Output— select the
speaker connected to
MeetingEye 600/PVT960/
VC880/VC800/VC200/
VC200-E/PVT980.
USBto Line output—select
the speaker connected to
the USB port on MeetingEye
600/MeetingEye 400/
PVT960/PVT940/PVT980/
PVT950/VC500/VC200/
VC200-E/VP59.
Note: the default value is Auto.
If VCS Phone is set as the
audio output device manually
or automatically, the audio input
device must be VCS Phone.
Web user interface
Endpoint
CTP20/CTP18
Note:

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals