Yealink VCM38 Administrator's Guide

| Basic Settings | 143
2. Configure and save the following settings:
Parameter Description Configuration Method
Default Configure the default home page
icon for the VCS device and the
touch panel.
• Default: the home page icon
are in default mode on the
VCS device and the touch
panel.
• Custom: you can customize
the home page icon for the
VCS device and the touch
panel.
Default: the default value is
Default.
Web user interface
Enter Meeting
Display or hide the Enter
Meeting icon on the home page
for the VCS device and the
touch panel. After enabled, this
icon appears only when you
log into a Yealink Cloud or YMS
account.
Note: you can only configure
this icon when you enable the
feature of customizing the home
page.
Web user interface
New Conference
Display or hide the New
Conference icon on the home
page for the VCS device and
the touch panel. After enabled,
this icon appears only when you
log into a Yealink Cloud or YMS
account.
Note: you can only configure
this icon when you enable the
feature of customizing the home
page.
It is enable by default.
Web user interface
Dial Display or hide the Dial icon
on the home page for the VCS
device and the touch panel.
Note: you can only configure
this icon when you enable the
feature of customizing the home
page.
Web user interface

Yealink VCM38 Specifications

General

Type	Conference microphone
Noise reduction	Yes
Microphone frequency	100 - 16000 Hz
Microphone sensitivity	-45 dB
Microphone pick-up range	6 m
Number of microphone arrays	8
Maximum sound pressure level (1kHz)	100 dB
Device interface	RJ-45
Connectivity technology	Wired
Maximum operating distance	40 m
Mounting type	Ceiling
Product color	Silver
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Number of products included	1 pc(s)
Harmonized System (HS) code	85181000
Power source	DC/PoE
Sustainability certificates	CE, Federal Communications Commission (FCC), REACH, RoHS

Weight and Dimensions

Width	127.3 mm
Height	66.3 mm