| Configuring Content Sharing | 180
definition of the presentation is good. You can not configure the content sharing mode for VP59, but you
can configure frame and resolution for VP59.
Procedure
1. On your web user interface, go to Setting > Video > Content Video.
2. Configure and save the following settings:
Parameter Description Configuration Method
Enable 4K
(it only is applicable to
MeetingEye 600/MeetingEye
400/PVT960/PVT940)
Enable or disable 4K for content
sharing.
Default: Disabled.
Web user interface
Enable 60fps
(it only is applicable to
MeetingEye 600/MeetingEye
400/PVT960/PVT940)
Enable or disable 60fps for
content sharing.
Default: Disabled.
Web user interface
Content Sharing Mode
(it is not applicable to VP59)
Configure the content sharing
mode.
• Sharing Document- select
this value to save bandwidth
when you are sharing a
document. By default, the
maximum frame rate is 15fps
and the maximum resolution
is 1080P.
• Sharing Video: select
this value to play video
fluently when you are sharing
a video. By default, the
maximum frame rate is 30fps
and the maximum resolution
is 720P.
Default: sharing document.
Web user interface
Frame Configure the maximum frame
rate when the content is sharing.
• 5 frame rate
• 15 frame rate
• 30 frame rate
• 60fps—this option appears
only when you enable
60fps. It is only applicable to
MeetingEye 600/MeetingEye
400/PVT960/PVT940.
Default: 15 fps.
Web user interface
To Next Page
Loading...
