EasyManuals Logo

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
| Configuring Camera Settings | 192
3. Configure and save the following settings:
Parameter Description Configuration
Method
Aperture
Disable aperture or set the desired value.
Value: F1.6, F2.0, F2.4, F2.8, F3.4,
F4.0, F4.8, F5.6, F6.8, F8, F9.6,
F11, F14 and off
Note: For VC880/VC800/VC500/PVT980/PVT950, the
default value is F3.4; for MeetingEye 600/PVT960, the
default value is F1.6.
Web user interface
Endpoint
CTP20/CTP18
Exposure
Compensation
Configure the value of exposure compensation.
The exposure compensation is used to compensate the
camera effectively when the camera is shooting in a backlit
environment. If the environment light is dark, you can
increase the compensation value.
Note: the valid value is -6 to 6. The default value is 0.
Web user interface
Endpoint
CTP20/CTP18
Flicker
Configure the value of camera flicker frequency.
Frequency:
50 Hz
60 Hz
The indoor lights powered by a 50Hz or 60Hz power
source may produce a flicker. You can adjust the camera
flicker frequency according to the power source that the
light is powered by.
Default: 50 Hz.
Web user interface
Endpoint
CTP20/CTP18
Gain/Gain Limit
Specify the value.
Note: the valid value is 1 to 15. For VC880/VC800/VC500/
PVT980/PVT950, the default value is 4; for MeetingEye
600/PVT96, the default value is 6.
Web user interface
Endpoint
CTP20/CTP18
Wide Dynamic
Range
Off or Specify the WDR. The value represents the
compression degree of the dynamic range
Cameras with WDR technology can work perfectly both
in the bright and the dark conditions and present clear
images that balances different lighting, so that you can
identify the details.
Off-do not use WDR.
1~5
Default: 2.
Web user interface
Endpoint
CTP20/CTP18

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals