EasyManuals Logo

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #197 background imageLoading...
Page #197 background image
| Configuring Camera Settings | 197
Parameter Description Configuration Method
Sharpness
Configure the sharpness of the
camera's image.
The sharpness is an indicator
that reflects the definition of the
image plane and the sharpness
of image edge. Increasing the
sharpness will improve the
definition of the image. However,
if the sharpness is set too high,
the image will look distorted and
glaring.
Note: the value is from 0 to 100.
The default value is 15.
Web user interface
Endpoint
CTP20/CTP18
Brightness
Configure the brightness of the
camera's image.
Note: the value is from 0 to 100.
The default value is 50.
Web user interface
Endpoint
CTP20/CTP18
Contrast
Configure the contrast of the
camera's image.
Note: the value is from 0 to
100. For VC880/VC800/VC500/
VC200/PVT980/PVT950,
the default value is 49; for
MeetingEye 600/ MeetingEye
400/PVT960/PVT940/VC200-E,
the default value is 50.
Web user interface
Endpoint
CTP20/CTP18
Noise Reduction (2D)
Specify the noise reduction (2D)
mode.
The available modes are
described as below:
Off
Low
Middle
High
Default: Middle.
Web user interface
Endpoint
CTP20/CTP18
Noise Reduction (3D)
Specify the noise reduction (3D)
mode. It indicates the coefficient
of the reduced noise in the
image. The higher the coefficient
is, the smaller the noise is.
Valid value: 0 - 22. The default
value is 3.
Web user interface
Endpoint
CTP20/CTP18

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals