Yealink VCM38 - Page 205

| Configuring Virtual Meeting Room | 205
• If you import an 8 ways multipoint license to the VC800/VC880/PVT980, X+Y<=8. Virtual meeting room
1 and virtual meeting room 2 support up to 8 ways video calls.
• If you import an 16 ways multipoint license to the VC800/VC880/PVT980, X+Y<=16. Virtual meeting
room 1 and virtual meeting room 2 support up to 16 ways video calls.
• If you import an 24 ways multipoint license to the VC800/VC880/PVT980, X+Y<=24. Virtual meeting
room 1 and virtual meeting room 2 support up to 24 ways video calls.
Note: When you import an 8 or 16-way multipoint license to the VC800/VC880/PVT980, virtual
meeting room 1 provides additional 5 voice calls.
Procedure
1. On your web user interface, go to Setting > Built-in MCU Setting > Conference Setting.
2. Select VMR Mode from the Conference Type drop-down menu.
3. Configure and save the following settings:
Parameter Description Configuration Method
Multipoint Allocation > Virtual
Meeting Room 1
Allocates the maximum ways of
video calls for virtual meeting
room 1.
Web user interface
Multipoint AllocationVirtual
Meeting Room 2
Allocates the maximum ways of
video calls for virtual meeting
room 2.
Web user interface
Virtual Meeting Room 1 >
Meeting Password
Enable or disable the system to
configure a password for virtual
meeting room1.
Default: Disabled.
Web user interface