EasyManuals Logo

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
| Traditional Deployment Methods | 64
2. Configure and save the following settings:
Parameter Description Configuration Method
Active/STUN Active
Enable or disable the STUN
(Simple Traversal of UDP over
NATs).
Default: Disabled.
Web user interface
Endpoint
CTP20/CTP18
STUN Server
Configure the IP address or
the domain name of the STUN
(Simple Traversal of UDP over
NATs) server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20/CTP18
STUN Port
Configure the port of the STUN
(Simple Traversal of UDP over
NATs) server.
Default: 3478.
Web user interface
Endpoint
CTP20/CTP18
Enabling STUN Feature for SIP Protocol
If you want to make private-to-public calls via SIP protocol (SIP account and SIP IP call), you can enable
STUN feature for SIP protocol.
Procedure
1. Do one of the following:
On your web user interface, go to Account > SIP Account/SIP IP Call > NAT Traversal.
On your VCS, go to More > Settings > > Advanced > Account > SIP IP Call > NAT Traversal.
For VP59, tap Settings Advanced Account SIP IP Call NAT Traversal.
On your CTP20/CTP18, tap > Settings > Advanced > Account > SIP IP Call > NAT Traversal.
2. Configure and save the following settings:
Parameter Description Configuration Method
NAT Traversal
Select STUN.
Web user interface
Endpoint
CTP20/CTP18
Related tasks
Setting SIP Account/SIP IP Call
Configuring NAT
H.460
VCS allows the firewall traversal of H.323 calls via H.460 protocols. To use this feature, make sure your
gatekeeper supports H.460 feature.

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals