EasyManuals Logo

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
| Configuring Account Settings | 94
Procedure
1. Do one of the following:
On your web user interface, go to Account > SIP Account.
On your VCS, go to More > Settings > Advanced > Account > SIP Account.
For VP59, tap > Settings > Advanced > Account > SIP Account.
On your CTP20/ CTP18, tap > Settings > Advanced > Account > SIP Account .
2. Configure and save the following settings:
Parameter Description Configuration Method
Line Active/SIP Account
Enable or disable SIP Accounts.
Note: the default value is On. If
it is set to disabled, the devices
cannot place or receive calls via
the SIP protocol.
Web user interface
Endpoint
CTP20/CTP18
Username
The username of this SIP
account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20/CTP18
Register Name
The registration name of this SIP
account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20/CTP18
Password
The registration password of this
SIP account.
Note: the default value is blank.
Web user interface
Endpoint
CTP20/CTP18
Server Host/Server
The IP address or domain name
of the SIP server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20/CTP18
Port
Specify the port of the SIP
server.
Note: the default port number
is 5060. The value can be any
integer from 0 to 65535.
Web user interface
Endpoint
CTP20/CTP18
Enable Outbound Proxy
Server/Outbound
Enable or disable the device
to send requests of the SIP
account to the outbound proxy
server.
Default: Disabled.
Web user interface
Endpoint
CTP20/CTP18

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals