NeoGate TG Series User Manual
http://www.yeastar.com 32/56
Design the name of this trunk, it will display in mobile
list and trunk status page.
Input the mobile number here to take a note only.
Calling Line Identification Restriction. If you want to
hide your mobile number, you can enable it. It’s
disabled by default.
Note: Please contact the SIM carrier to confirm if it’s
supported in advance.
To adjust the received volume, please configure this
one. No need to change it if the volume is fine. It’s
60% by default.
To adjust the transmit volume, please configure this
one. No need to change it if the volume is fine . It’s
40% by default
When dialing from SIP to GSM, during the trying
period at SIM carrier side, it’s completely sclient in SIP
side. Enable this to get a virtual ring back tone.
2) Call Duration Settings
In this page we can configure the duration of this channel, you can also enable the blance
alarm when the time is beyond the value you have pre-configured.
Figure 7-3
Single Call Max Duration(min)
Configure the duration of each call, it’s 0 by
default, which means no limit.
Configure the max duration of this GSM port,
To Next Page
Loading...
Need help?
General
