NeoGate TG Series User Manual
http://www.yeastar.com 33/56
it’s 0 by default, which means no limit.
The date to clean the duration status each
month.
When Max. Call Duration(min) is configured a 0
(no limit), this feature is disabled.
Cofigure the time duration when NeoGate TG
will send the alarm message. The value must be
less than “Max Call Duration”.
Choose the port to dial the alarm call.
The number to receive the alarm call.
The prompt played during the alarm call,you
can customize the prompts as your wish.
The email address to receive the alarm email.
Note: please make sure SMTP test is
successful in “Email settings” page before
configuring this.
3) Advanced settings.
Figure 7-4
International Mobile Equipment Identity of this module, it’s not
changeable.
International Mobile Subscriber Identification of SIM card, it’s not
changeable.
The SMS center of this SIM card, NeoGate will generate this by
default. You can also input he number here for the carrier if it’s not
the default one.
The carrier connected by default. You can also choose manual
mode if this SIM card is supported by several carriers.