7-19
IM CW240E
Measurements
7
7.4 Measuring Demand
● Description of the Demand Screen (Items to be Measured)
F
1
F
1
F
2
F
3
F
4
F
5
Integration measurement state:
STANDBY
INTEG.
END
Maximum demand power
(time at which maximum demand
occurred)
Integration information:
Wh+: active energy (consumption)
Wh-: active energy (regenerative)
Varh+: reactive energy (lagging)
Varh-: reactive energy (leading)
P: active power (consumption)
Q: reactive power (lagging)
PF: power factor
NOTE
If the previous integration measured data remains, the maximum demand value
is continued. To reset the maximum demand value, press the F5 key (HOLD/
Clear) for more than 3 seconds to clear the integrated data as necessary.
To Next Page
Loading...
