YOKOGAWA CW240

11-2
IM CW240E
11.1 PC Card Specifications
With the CW240, measurement data and setting values can be saved in a PC
card. Also, stored setting values can be read out and used for settings.
The PC card interface used in this device conforms to the following PC card
standards.
• PCMCIA
• Japan Electronic Industry Development Association (JEIDA)
Slot: TYPE II x 1 set
Card Type: Flash ATA
Format: MS-DOS format
● PC cards for which operation has been confirmed
Compact Flash (using a PC card adapter)
Company Name Model Capacity
32 MB
64 MB
128 MB
256 MB
512 MB
97031
97032
97033
97034
97035
SanDisk Corporation-made
Yokogawa M&C Corporation
NOTE
• Be sure to format the PC card before use. (File processing)
• Some types of PC card cannot be used. Use the cards for which operation has
been confirmed, listed above.
• See the operation manual accompanying the card for details regarding its han-
dling.
Chapter 11 PC Card