YOKOGAWA CW240 User Manual

8-3
IM CW240E
Saving Measured Data
8
8.1.2 File Names
File names (numbers) should be up to 8 alphanumeric characters.
8 characters or less
Example: 240AMXXX.CSV
To specify a file name: Enter a file name on the Save 1/2 screen.
If no file name is specified: The CW240 automatically assigns a file name.
● Not Specifying a File Name
If no file name is specified, the CW240 automatically assigns a file number as
shown below.
Measured Data:
File Type File Name File Format
Measured data file
Automatic
save
Short-time interval 240AMXXX.BIN
240AMXXX.CSVStandard interval
Manual save 240MMXXX.CSV
240ARXXX.ARM
Automatic save
Manual save
240AWXXX.WFMAutomatic save
240MWXXX.WFMManual save
240MDXXX.BMP
Screen copy (Hard copy)
Manual save
Voltage quality
data file
Waveform data file
Screen data file
Binary
Text
Text
Binary
Bitmap
Set Values:
File Type
File Name
File Format
Setting file Manual save 240MCXXX.SET Text
NOTE
For the file number (XXX) part, any unassigned number from 000 to 029 is as-
signed in increasing numerical order. (If a number exceeds 029, an error mes-
sage is displayed.)
For automatic save, a file number changes each time integral measurement
is made.
For manual save (measured data or waveform data), data is added (in the
same file number) each time the SAVE key is pressed.
If the number of data lines exceeds 100, if integration measured data is
cleared, or if the setting conditions have been changed, the file number is
changed.
8.1 Data Save

YOKOGAWA CW240 Specifications

General

Brand	YOKOGAWA
Model	CW240
Category	Measuring Instruments
Language	English