YOKOGAWA DPharp EJX***A Series User Manual

<2. Connection>
2-3
IM 01C25T01-06EN
● Conrmation by using HART conguration
tool
a) Connect the conguration tool to the
transmitter.
b) Conrm numerical number displayed on
“Fld dev rev” column.
• Procedure to call up the display
DD and DTM
(excluding EJX_
HART 5[1.2])
[Root Menu (refer to 3.1.1) ]
→ Review →Fld dev rev
EJX_HART 5[1.2]
DTM
Conguration → HART
→Fld dev rev
(2) Conrmation of device revision for the
conguration tool
Conrm the device revision from the installed
DD le name according to the procedure
provided for the conguration tool.
The rst two digits indicate the device revision
and the next two digits indicate the DD revision.
0 a 0 2. X X X
DD revision
Device revision
NOTE
Device revision of DD le is given in hexadecimal
2.4 Set the parameters using
DTM
When congure the parameters using FieldMate,
use the DTM (Device Type Manager) shown in the
Table 2.2.
NOTE
The DTM revision can be conrmed by “DTM
setup”.
Device Files is a Media included in FieldMate.
The user registration site provides Device Files
with the latest update programs.
(URL: https://voc.yokogawa.co.jp/PMK/)
In case update, following operation by “DTM
setup” is required.
• Update DTM catalog
• Assign corresponding DTM to the device
(refer to Table 2.2)
Refer to FieldMate Instruction Manual for detail.
Table 2.2 Applicable DTM
File Applied device
Filename
DTM
revision
FDT
revision
Model
HART
protocol
revision
Device type
Device
revision
EJA-NEXT
HART DTM
3.3.0.140 or later
*2
FDT1.2
EJA series
5
EJA-NEXT
(0x5C)
1
EJA-NEXT
FDT2.0
HART DTM
5.0.0.0 or later
*3
FDT2.0
EJA-NEXT
HART 7 DTM
3.3.0.140 or later
*2
FDT1.2
7
EJA-NEXT
(0x375C)
10
EJA-NEXT
FDT2.0
HART 7 DTM
5.0.0.0 or later
*3
FDT2.0
EJA-NEXT-LP
HART 7 DTM
3.5.0.40 or later
*4
FDT1.2
7
EJA-NEXT-LP
(0x375D)
1
EJA-NEXT-LP
FDT2.0
HART 7 DTM
5.0.1.12 or later
*4
FDT2.0
EJXV3.1 1.4.160.8 or later
*1
FDT1.2
EJX series
5
EJX
(0x51)
3
EJXFDT2.0
HART DTM
5.0.0.0 or later
*3
FDT2.0
EJX HART 7
DTM
3.3.0.140 or later
*2
FDT1.2
7
EJX
(0x3751)
10
EJXFDT2.0
HART 7 DTM
5.0.0.0 or later
*3
FDT2.0
*1: The DTM is included in Yokogawa DTM Library HART 2012-2/Device Files R3.03.03 or later.
*2: The DTM is included in Yokogawa Device DTM Library 2.3/Device Files R3.03.03 or later.
*3: The DTM is included in Device DTM Library 4.0 or later.
*4: The DTM is included in Device DTM Library 5.0 or later.

YOKOGAWA DPharp EJX***A Series Specifications

General

Brand	YOKOGAWA
Model	DPharp EJX***A Series
Category	Transmitter
Language	English