YOKOGAWA DPharp EJX***A Series User Manual

Rev-1
IM 01C25T01-06EN
Revision Information
 Title : DPharp
HART 5/HART 7 Communication Type
(EJXA, EJAE)
 Manual No. : IM 01C25T01-06EN
Edition Date Page Revised Item
1st June 2010 — New publication
2nd Apr. 2012 —
2-1
3-34
Re-edit to a common User’s Manual of HART 5 and HART 7.
2.1 Add integral indicator display when powering on.
3.3.18 Add switching procedure for HART protocol revision
(HART 5/HART 7)
3rd June 2012 — Add EJA series
4th June 2013 — Add DTM for EJX and EJA based on FDT 2.0.
5th June 2014 2-4
3-7, 5-6
Change terminal drawing.
Add note for Option Password parameter.
6th Oct. 2014
―
1-3
1-4
2-1
2-2
2-3
2-4
3-13
3-14
3-16
3-21
3-22
3-25
4-26, 4-30
5-1
5-2
5-2 to 5-6
Add
4-20mA
mark. (2-1, 3-6, 3-27, 3-33, 5-1, 5-4, 5-5, A1-1)
1.3 Add descriptions for output signal.
1.4 Add information of Low Power type.
2.1 Add Software Revision display function.
2.2 Add output signal code Q in the table.
2.3 Add information of Low Power type.
2.5 Modify the descriptions. Add gure of 1 to 5 V output.
3.2.3 Add “1 to 5 V” in the NOTE.
3.2.5 Add NOTE.
3.2.6 Add “1 to 5 V”.
3.3.2 Add value for 1 to 5 V output.
3.3.9 Change “4 to 20 mA DC” to “analog”
3.3.11 Change “4 to 20 mA” to “analog”
3.3.15 Add value for 1 to 5 V output.
4.3 Add
EJX
mark.
5 Add information for output type.
Add *4.
Add
EJX
mark.
7th Apr. 2019
1-5
3-13
3-24
5-10
A1-1
A1-2
Delete “1.5 ATEX Documentation.”
3.2.3 Add descriptions for Safety Instrumented System.
3.3.13 Add descriptions for Safety Instrumented System.
5. Add *5.
A1.2.3 Add note.
A1.2.9 Add document title and number.

YOKOGAWA DPharp EJX***A Series Specifications

General

Brand	YOKOGAWA
Model	DPharp EJX***A Series
Category	Transmitter
Language	English