YOKOGAWA F3CU04-1S User Manual

B3-16
IM 34M06H62-02E 2nd Edition : June 2008-00
B3.3.3 Sample Program for Setting Operation Parameters
This section shows a sample program for setting operation parameters. Always set
controller parameters and I/O parameters before operation parameters.
 Setting Operation Parameters for Dynamic Auto-tuning
The following is a sample program for setting operation parameters for dynamic
auto-tuning. The program enables dynamic auto-tuning, specifies a set point, and sets up
Run/Stop and other operation control parameters essential for module operation.
Figure B3.4 Sample Program for Setting Operation Parameters for Dynamic Auto-tuning

YOKOGAWA F3CU04-1S Specifications

General

Brand	YOKOGAWA
Model	F3CU04-1S
Category	Control Unit
Language	English