TOC C-1
IM 34M06H62-02E 3rd Edition : Jul.16
2015-00
PART-C describes the functions of the module.
This module has four controller loops, which can be configured to operate in
pairs or individually to serve different purposes. This part first describes the
controller mode that defines the way these controller loops are used, followed by
the individual functions of the module.
C1. Controller Mode ........................ Describes the interdependency
of the controller loops.
C2. Output-related Functions ........ Describes output type selection
and other output-related
functions.
C3. PV-related Functions ............... Describes PV input type
selection and other input-
related functions.
C4. SP-related Functions ............... Describes set point (SP), limiter,
and other SP-related functions.
C5. Auto-tuning Function ............... Describes the Dynamic
Auto-tuning and the normal
Auto-tuning function.
C6. Control and Computation
Function .................................... Describes the control and
computation function settings.
C7. Operation Control .................... Describes the Run/Stop and
other operation control modes.
C8. Alarm Function ......................... Describes the alarm-related
functions.
C9. Disable Backup Function ........ Describes how to disable
backup of parameters.
C10. Self-diagnosis Function .......... Describes the self-diagnosis
function for monitoring
operation status and hardware
failure.
C11. Selecting Temperature Unit ..... Describes how to set the
temperature unit (C or F) to be
used with the module.
Temperature Control and PID Module
PART-C Function Description
IM 34M06H62-02E 3rd Edition
To Next Page
Loading...
Need help?
General
