YOKOGAWA F3CU04-1S User Manual

A4-5
IM 34M06H62-02E 2nd Edition : June 2008-00
Table A4.2 Power Frequency Selection
Power Frequency
Selection
Power Frequency Selector
Switch (SW1-2)
Software Setting
*1
Remarks
FREQ
50 Hz OFF 0 Factory setting
60 Hz ON 1
*1: “Software Setting” refers to values specified for FREQ. Any value not listed here is ignored. To enable software setting, set the input
type selector switches to “set by software”, that is, “SW5=0; SW1-4=OFF”. If software setting is enabled, the initial power frequency
setting follows SW1-2. This may be subsequently overridden using the “software setting”.

YOKOGAWA F3CU04-1S Specifications

General

Brand	YOKOGAWA
Model	F3CU04-1S
Category	Control Unit
Language	English