7-13
IM 04L20A01-01E
7
Data Save/Load Operations
Collectively Saving Data When Data Acquisition to the Internal Memory Is Stopped
<Operation Mode>
Saves the data collectively when the data acquisition to the internal memory is stopped.
Display data, event data, manual sampled data, TLOG data (/M1, /PM1 option), and
report data (/M1, /PM1 option) are to be saved.
Procedure
Collectively Saving Data
MENU key (switch to setting mode) #7 soft key (select [Save/Load, Clear data]) > #3
soft key (select [Save data])
From the operation mode, use the above keys to save data collectively.
Note
You cannot perform the operation of collectively saving data if computation is in progress.
7.3 Saving Data to the External Storage Medium (Only for Models with an External Storage Medium Drive)
To Next Page
Loading...
Need help?
General
