8-5
IM 04L20A01-01E
Computation and Report Function Related Operations (/M1 or /PM1 Option)
8
8.2 Starting, Stopping, and Resetting the
Computation
This section explains how to start/stop computation, how to reset computation, and how
to clear the computation data dropout indication.
Starting the Computation <Operation Mode>
Procedure
Starting the Computations
Press the START key.
When the START key is pressed, computation and data acquisition to the internal
memory start.
While computation is in progress, a computation icon is displayed in the status display
section.
Computation icon
• Starting Only the Computations
1. In operation mode, press the FUNC key.
A soft key menu is displayed at the bottom of the display.
2. Press the [Math START] soft key.
A computation icon is displayed in the status display section.
Stopping the Computation <Operation Mode>
Procedure
Stopping the Computations
1. Press the STOP key.
The following dialog box appears for confirmation.
2. Select [Mem+Math] and press the DISP/ENTER key.
When the DISP/ENTER key is pressed, computation and data acquisition to the
internal memory stop.
To Next Page
Loading...
Need help?
General
