YOKOGAWA GR2SW-699FA User Manual

  2.HardwareSpecications
2-15
TI 30A10A30-01E
2.5 Hardware Information
2.5.1 HardwareSpecificationList
Hardware specifications of the Recommended Switches are as shown below.
Table HardwareSpecificationsList
ITEM
Managed Switches
Unmanaged
Switch
RS40 Family MACH104 Family MAR1040 Family
SPIDER II
Family
DCInput
Redundant Power
Model
ACInput
Single
Power
Model
ACInput
Redundant
Power
Model
ACInput
Single
Power
Model
ACInput
Redundant
Power
Model
DCInput
Redundant
Power
Model
DCInput
Single
Power Model
Dimensions,weight
Mounting
DIN Rail 19 inch rack 19 inch rack DIN rail
Dimensions
W x H x D (mm)
110 x 131 x 111 448 x 44 x 345 448 x 44 x 345
35 x 154 x
121
Weight
600 g 4.2 kg 4.4 kg 4.2 kg 4. 4 kg 270 g
Power requirements
Nominal
voltage
12 to 48 V DC
100 to 240 V AC
(47 to 63 Hz)
100 to 240 V AC
( 50 to 60 Hz )
24 to 48 V
DC
-
Operating
voltage range
9.6 to 60 V DC -
90 to 265 V AC
(47 to 63 Hz )
18 to 60 V
DC
9.6 to 32.0 V
DC
Power
consumption
20 W (max) 35 W (max) 26 W (max)
6.6 W
(max. at 24 V)
Current
- 0.4 to 0.2 A - - -
Environment
Operating
Temperature
-40 to 70 °C 0 to 50 °C -40 to 70 °C -40 to 70 °C
Storage
Temperature
-40 to 85 °C -20 to 85 °C -40 to 85 °C -40 to 85 °C
Humidity
10 to 95%
(Non-condensing)
10 to 95 %
(Non-condensing)
5 to 95 %
(Non-condensing)
0 % to 95 %
(Non-
condensing)
Air Pressure
Up to 2000 m
(795 hPa)
Up to 2000 m (795 hPa) Up to 2000 m (795 hPa)
Up to 2000 m
(795 hPa)
Protection
Class
IP20 IP30 IP30 IP30
FAULTsignalcontact
Maximum
Current
1 A 1 A 2 A -
Maximum
Voltage
60 V DC 60 V DC 30 V DC -
Approvals
Hazardous
Location
uCL1604 Non-
Incendive Class1
Dev2
ATEX100a (Type N)
- uCL1604 Non-Incendive Class1 Dev2 -
Shipbuilding
ABS (American
Bureau of Shipping)
DNV GL
- DNV GL -
Protective paint
ANSI/ISA S71.04 G3 - ANSI/ISA S71.04 G3 -
Dec. 26, 2016-00

YOKOGAWA GR2SW-699FA Specifications

General

Brand	YOKOGAWA
Model	GR2SW-699FA
Category	Switch
Language	English